Hardwood Mills GT26, Руководство пользователя

Страница: 10 / 45

Page | 10
WARRANTY
commercially. At a minimum, you should keep adequate stock of blades,
spare belts, bearings, blade guides and track sweepers.
Hardwood Mills warrant that the new GT26 spare parts (except consumables such
as but not limited to blades and belts), will be free under normal use and
maintenance, from any defects in workmanship and materials for a period of forty-
five days from the date of purchase by the
original purchaser.
To obtain warranty service: Contact Hardwood Mills via
sales@hardwoodmills.com.au with the part number and issue, your name and best
contact number.
Engine warranty: Hardwood Mills does not warrant the engine; the engine is
warranted directly by the engine manufacturer. Refer to your engine owner’s
manual for the warranty policy regarding your engine. Contact your engine
manufacturer’s customer service department or your local authorised engine
dealer directly with any questions regarding your engine.
Kohler Australia 1800 564 537
Or check their website.
START UP PROCEDURE - EQUIPMENT OPERATION
1. Wear heavy-duty work gloves, ANSI-approved goggles behind a full face shield, steel-toed work
boots, and a dust mask.
2. Operate only with assistance.
3. Ensure guide blocks are tight and track is level
3. Fill the lubrication tank with clean water and washing up detergent .
5. Start and operate the engine according to the provided engine manual.
6. Depress the throttle to bring the blade up to full speed.
7. Throttle should be fully depressed when the saw is under load .
8. Cut branches off the lumber to be processed.
9. WARNING: to avoid death or serious injury. Do not cut lumber with foreign objects in it such as
nails, any metal pieces, etc.
10. Place the lumber to be cut on the supports.
11. WARNING: The operator and any assistants must stay clear of the front and back of the blade
whenever the engine is on.
12. Move the saw head slowly along the track and against the lumber to make the cut.
13. Trim off the rounded sides of the log.
14. When the log is squared-off, boards or posts can be cut to custom specifications.
15. To prevent accidents, turn off the engine and disconnect its spark plug wire after use. Wait for the
engine to cool, clean external parts with a clean cloth, then store the equipment out of children
’s
reach.