HardWire SP-7, Руководство пользователя

Страница: 18 / 28

12
Tap Tempo
The SP-7 Phaser’s Foot Switch can be used as a Tap Tempo switch for setting
the phaser effect’s modulation speed time during a live performance.
To access Tap Tempo, do the following:
1. Press and hold the Pedal Switch for 3 seconds. The effect first will turn
on and the Indicator LED lights solid BLUE (NOTE: If the effect was
already on, it will first turn off and then back on after 3 seconds).
2. After 3 seconds of holding the Foot Switch, the Indicator LED will begin
flashing BLUE indicating Tap Tempo mode is now active and the LED
flashes at the current modulation Speed.
3. Tap the Foot Switch at least two times to set a new modulation speed.
The last two pedal tap intervals set the modulation speed. After 4
seconds, the tap tempo function times out and you will need to tap 2
times again to set the tempo.