HardWire SP-7, Руководство пользователя

Страница: 10 / 28

4
must be used. Signals will still be heard at both outputs when only
the Input 1 (Mono) jack is connected to. Connecting a guitar cable
to the In 1(Mono) jack supplies battery power even though the
Indicator LED may not be lit. To prolong battery life, disconnect
all cables from the pedal when not in use. If the optional PS200R
power supply is used for power, the input can remain connected.
7. Input 2
- Connect a second input to this jack for stereo operation.
Inputs 1 and 2 are fed through the effect then to Outputs 1 and 2
and will keep true stereo separation between channels.
8. Foot Switch Release Pins
- These two pins are spring-loaded
hinges that hold the pedal in place. Push these pins in with the tip
of a 1/4” guitar cable to release the pedal from the pedal chassis
exposing the battery compartment (See battery replacement
diagram).
9. Indicator LED - This LED indicates when the effect is turned
on or off. When battery power is low (approximately 15 minutes