10
www.hardlifeutility.com
Figure 5
Figure 6
2. Cut pieces of ropes (component code 20) to suit your requirement and use them to lace the front cover,
from the inside, to the frame of the front door through the grommets provided on the cover, thus secur-
ing the front cover, as shown in Figures 5 and 6.
3. Tie the remaining rope to the bottom of the door frame, as shown in Figure 6.
4. Repeat the same procedure for the back door cover (component code 14).
5. To open the doors, unzip the front door and back door covers, roll them up, and secure with bungee
cords (component code 17), as shown in Figure 7.
