Hardi RANGER PRO, Инструкция

Страница: 18 / 76

3 - Description
3.8
The valve is marked with an arrow on the green disc that indicates the amount of liquid that passes through the valve. If
handle is turned to a position near the tip of the arrow, then only a small amount of liquid is allowed to pass the valve.
Otherwise, if handle is turned to a position in the wide end of the arrow, it means that a larger amount is passing the
valve. This gives the posibility to continously adjust how large amount of fluid from the pump is used for agitation in the
tank and for spraying.
Examples on handle positions at different agitation quantities:
1. Handle is in the “widest end of arrow” position (full open).
Agitation quantity is 100%.
2. Handle is positioned at the middle of the arrow. Agitation quantity
is 50%.
3. Handle is positioned in closed position. Agitation quantity is 0%.
The HARDI FILLER is situated in the working zone on the sprayers left
side, just behind the MANIFOLD valves. When being used it should
be folded down by grabbing the handle and pulling it against your-
self and down.
Open the valve in the bottom (A) to empty the FILLER. The valve (C)
engages the HARDI FILLER flushing device, used when mixing the
chemicals. The grip (B) are used for rinsing of the FILLER or chemical
container cleaning.
Agitation valve
HARDI FILLER