manualshive.com logo in svg

Hardi N Series, Руководство оператора

Поделиться
Скачать
Hardi N Series Скачать руководство пользователя страница 64

62

HARDI

®

 N-SERIES 3-PT SPRAYER DIAPHRAGM OPERATOR'S MANUAL

Off-Season Storage (continued)

10. All electric plugs and sockets are to be stored in a dry plastic bag to 

protect them from moisture, dirt, and corrosion.

11. Remove all the control boxes (including any rate controller control 

box) from the tractor and store them in a dry and clean place.

12. To pro tect against dust, the spray er can be cov ered by a tar pau lin. 

Ensure ventilation to prevent condensation.

7.1 Preparation After Off-Season Storage

After a stor age period, the sprayer should be pre pared for the next 
season the fol low ing way:

1. Remove the cover. (If fi tted)

2. Fit the pressure gauge again. Seal with Tefl on tape.

3. Con nect the sprayer to the trac tor, including electric controls (if any).

4. Emp ty the tank of remaining an ti freeze.

5. Rinse the entire liquid circuit on the spray er with clean water.

6. Fill with clean water and check all functions.

Содержание N Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды