Hardi MEGA 230, Руководство оператора

Страница: 58 / 90

56
HARDI MEGA 230 / 350 CENTRIFUGAL OPERATORS MANUAL
8.0 ADJUSTMENTS
HARDI CANNOT ASSUME RESPONSIBILITY OR BE HELD LIABLE
FOR ANY LOSS OR DAMAGE THAT OCCURS DUE TO LACK OF
ADJUSTMENTS OR MAINTENANCE.
WE URGE YOU TO FOLLOW THE ADJUSTMENT AND
MAINTENANCE RECOMMENDATIONS FOR EVERYONES SAFETY.
MAKE IT A DAILY HABIT TO INSPECT YOUR BOOM FOR NEED OF
ADJUSTMENT OR MAINTENANCE.
IMMEDIATELY REPLACE ANY PARTS ON THE BOOM THAT ARE
WORN OR BROKEN.
ALWAYS CLEAN YOUR BOOM BEFORE ADJUSTING IT TO AVOID
UNNECCESARY CONTACT WITH CHEMICALS.
The boom wing sections on the Mega Sprayer have been preassembled,
adjusted and tested in the factory. The boom however, will require
additional adjustments shortly after being taken into use (10 hours) and
thereafter at a minimum an annual basis to perform at its maximum
levels.
To further insure the booms proper performance, the Mega boom also
has to be maintained on a regular basis. Please follow the suggested
maintenance intervals.
Perform the adjustment procedures in the same sequence as they are
written in this manual.
8.1 Adjustment and Maintenance Intervals
IMPORTANT: To maximize boom life and performance, retighten all
boom fasteners and inspect boom for proper adjustment
after the first 10 hours of use.
Lubricating of the boom should be done daily to ensure
maximum performance and life.(Refer to maintenance
section 7)