Hardi FTZ Force Boom, Руководство оператора и по техническому обслуживанию, Страница: 4 / 35

Safety alert icons
This manual contains safety information which could prevent crop damage or save a life. Safety information is
included in each section and is highlighted by the following icons according to the level of potential risk.
Warning: This indicates the highest level of hazard alert. Failure to comply with the information
contained here could result in personal injury or death.
Caution: This indicates that mandatory action is required . Failure to comply with the information
contained here could result in damage to crops, the equipment and / or the environment.
Note: This indicates practical information regarding safe and effective use of the equipment and it’s
systems.
Chemical safety
Always read chemical labels and follow the instructions. (See chemical safety section for further details)
Always wash and rinse equipment and tools before servicing and after use (see section on de-contamination).
Avoid unnecessary contamination risk. Pressure test the equipment with clean water prior to fi lling with chemicals.
Never eat, drink or smoke while spraying or working with contaminated equipment.
Always change clothes after spraying and carefully launder to prevent cross-contamination.
Never drink water from any of the tanks or assume that the contents of the ‘clean water’ tanks are safe.
In case of poisoning identify chemicals used and seek medical advice immediately.
Mechanical safety
Never service or repair the equipment while it’s operating.
De-pressurize equipment after use and before servicing.
Disconnect power and ensure that all hydraulics are in the recommended position before servicing.
Always replace all safety devices and shields immediately after servicing.
When using an arc welder disconnect any power leads to the sprayer prior to welding and remove any fl ammable
or explosive material from the area.
General safety
Keep unauthorised persons and children away from the equipment at all times. Never attempt to enter a tank or
allow some one else to for any reason.
About this manual
This manual covers the operation, maintenance and spare parts information required for the safe and effective use
of the HARDI FTZ Force Boom in 28, 30, 32 and 36 metre widths.
It is designed to accompany the operation and maintenance documentation supplied with your sprayer and covers
the safety, systems, controls, and components specifi c to the boom only.
Warning: Operators must read all related material before use. Local law may require operators to be
certifi ed before using spray equipment and some chemicals. Consult local authorities.
Warning: Although every effort has been made to include as much safety information as practical, it is
impossible to anticipate every scenario that may present a risk. It is therefore the responsibility of the
operator to exercise safe operating practices.
Note: Specifi c safety warnings appear at the beginning of each chapter where applicable. Read
them carefully. If any portion of this instruction book is unclear contact your HARDI dealer for further
information.
1 - Introduction
Safety Information
1. 3