Instructions
5
Cleaning (Optional)
The FrontTank has its own pump and cleaning nozzles for internal
cleaning.
1.
To switch the FrontTank cleaning pump ON/OFF, press button (5) on
the FT 3610 control box.
μ
ATTENTION! Always fill the RinseTank before starting the FrontTank
cleaning procedure, to ensure the pump has been primed.
μ
ATTENTION! It is advisable to conduct a timed test with a full
RinseTank, to get the correct time it takes to empty the RinseTank.
This should be done before any spray job and cleaning is carried
out.
÷
NOTE! The cleaning procedure is split into three cycles, each
running approx 1/3 of the measured time. Do NOT exceed the total
running time measured in the above mentioned test, to prevent
unintentional dry running of the pump.
±
WARNING! Do NOT run the cleaning pump dry, doing so will
damage the pump.
Light
The FrontTank comes with a pair of front-mounted LED work lights.
1.
To switch the work light ON/OFF, press button (6).
μ
ATTENTION! The lights mounted on the FrontTank are work light
only, and NOT legal for road use.
