manualshive.com logo in svg

Hardi FALCON Boom HY, Руководство оператора

Поделиться
Скачать
Hardi FALCON Boom HY Скачать руководство пользователя страница 23

21

HARDI

®

 FALCON BOOM OPERATOR‘S MANUAL

3.  Loosen the lock nuts on the turnbuckle.  Adjust (tighten) the turn-

buckle so that the outer wing section contacts the boom transport
stop bracket.  Tighten the turnbuckle another 4 complete turns and
retighten the lock nuts.

8.0 MAINTENANCE

In order to derive full benefit from the boom for many years, the following
maintenance program should be followed.

WARNING:

ALWAYS CLEAN YOUR BOOM AT THE END OF THE
WORK DAY OR BEFORE SERVICING IS DONE TO AVOID
UNNECESSARY CONTACT WITH CHEMICALS!

IMPORTANT:

 

Always read carefully through the individual

paragraphs regarding maintenance jobs before starting the job.  If
any portion remains unclear or requires facilities which are not
available, then for safety reasons, please leave the job to your
HARDI

® 

dealer’s workshop.

NOTE!

 For maintenance of the sprayer, please refer to your

sprayer’s operator’s manual.

To effectively maintain the boom you must:
1.  Clean the boom as part of cleaning the sprayer, after spraying is

completed and before performing any maintenance (Section 8.1).

2.  Lubricate the boom according to the lubrication interval reached

(Sections 8.2, 8.2A & 8.2B).

3.  Perform Adjustments as needed following a daily boom inspection

(Section 7).

4.  Perform Occasional maintenance jobs as needed following boom

inspections.

5.  Immediately fit Replacement parts for parts that are worn or broken.

8.1 Cleaning

The entire sprayer and the boom should be cleaned together only (Refer
to the Cleaning section in you HARDI

®

 sprayer’s operator’s manual).

If you have a HARDI

®

 FALCON boom fitted to a HARDI

®

 sprayer that does

not have an operator’s manual, or if you have a HARDI

®

 FALCON boom

fitted to a non-HARDI

®

 sprayer and you don’t have any form of instructions

or manuals, please read the following for a brief overview of cleaning:

Содержание FALCON Boom HY









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды