Hardi FALCON Boom HY, Руководство оператора

Страница: 18 / 40

16 HARDI ® FALCON BOOM OPERATOR‘S MANUAL
7.0 ADJUSTMENTS
WARNING: • HARDI ® CANNOT ASSUME RESPONSIBILITY OR BE
HELD LIABLE FOR ANY LOSS OR DAMAGE THAT
OCCURS DUE TO LACK OF ADJUSTMENTS OR MAIN-
TENANCE.
• WE URGE YOU TO FOLLOW THE ADJUSTMENT AND
MAINTENANCE RECOMMENDATIONS FOR EVERY-
ONE’S SAFETY.
• MAKE IT A DAILY HABIT TO INSPECT YOUR BOOM
FOR NEED OF ADJUSTMENT OR MAINTENANCE.
• IMMEDIATELY REPLACE ANY PARTS ON THE BOOM
THAT ARE WORN OR BROKEN.
• ALWAYS CLEAN YOUR BOOM BEFORE ADJUSTING
IT TO AVOID UNNECESSARY CONTACT WITH
CHEMICALS
.
Your new HARDI
®
FALCON boom was hydraulically charged and ad-
justed at time of assembly. (This applies to booms sold with sprayers as
complete units only.)
The FALCON boom will require additional adjustments shortly after being
taken into use (after 10 hours) and thereafter at a minimum of an annual
basis or when necessary to perform at its maximum level.
To further ensure proper performance the FALCON boom also has to be
maintained on a regular basis. Please follow the suggested maintenance
intervals. It is important to perform the adjustment procedures in the same
sequence as they are written in this manual.
7.1 Adjustment And Maintenance Intervals
IMPORTANT:
To maximize boom life and performance, retighten all
boom fasteners and inspect boom for proper adjustment after the
first 10 hours of use. Thereafter adjust the boom at a minimum of
once a year and check all fasteners at 50 hr. intervals. Lubrication of
the boom should be done daily to ensure maximum performance and
life (Section 8.2).