Hardi COMMANDER Classic PRO Скачать руководство пользователя страница 64

Страница: 64 / 96

6 - Maintenance

6.6

DANGER! Never inflate tyres more than to the pressure specified in the table. Over-inflated tyres can explode and
cause severe personal injuries! See the part “Occasional maintenance - Change of tyre”.

WARNING! If renewing tyres always use tyres with min. load index as specified.

The air brakes are checked for leaks by following procedure:

1. Connect the snap couplers to the tractor and fill the trailer air tanks.

2. Check for leaks with brakes released.

3. Apply the brake up to full pressure.

4. Check for leaks with brakes applied.

Check the tyre pressure according to the table in “Technical specifications”.

50 hours service - Expansion bottle (SELF TRACK only)

Tighten wheel bolts and nuts as follows with following torque
wrench settings:

Wheel hub to rim plate: 490 Nm (362 lbft)

Tightening sequence: See illustration and tighten in order of num-
bering.

Check air pressure in the expansion tank for the hydraulic damping
at the pressure gauge. Fill through valve (A) if necessary.

Air pressure: 5 bar (73 p.s.i.)

50 hours service - Tyre pressure

50 hours service - Air brakes

50 hours service - Wheel bolts and nuts

Содержание COMMANDER Classic PRO

































































































Результаты поиска

Содержание COMMANDER Classic PRO

Отзывы:

Hardi COMMANDER Classic PRO, Инструкция, Страница: 64 / 96

Результаты поиска

Содержание COMMANDER Classic PRO

Отзывы: