manualshive.com logo in svg

Hardi COMMANDER Classic PRO, Инструкция, Страница: 31 / 96

Поделиться
Скачать
Hardi COMMANDER Classic PRO Скачать руководство пользователя страница 31

4 - Sprayer setup

4.7

DANGER! Test of the hydraulic system should be done very cautiously. There may be air trapped in the system
which can cause violent movements of the boom.

DANGER! Hydraulic leaks: Never use your fingers to locate a leakage in any part of the hydraulic system. Due to
high pressure, hydraulic oil may penetrate the skin.

Requirements - tractor (VHZ model)

Ensure that snap couplers are clean before connection!

After having operated the boom and the system has been filled with oil, check tractor’s hydraulic oil level and top up if
necessary.

Connection requirements are:

• One single-acting outlet to raise and lower the boom.

• One double-acting outlet to fold and unfold the boom.

• One double-acting outlet for hydraulic slanting control (optional equipment).

Connection requirements are:

• One single-acting outlet to raise and lower the boom.

• One double-acting outlet for the electro-hydraulic operation of the boom functions.

Requirements - tractor (VHY model)

General info

Hydraulic systems

Содержание COMMANDER Classic PRO

































































































Отзывы:

Нет отзывов