ENGLISH
12
C.
Increment measuring
D.
Depth measuring
E.
Measurement deviation control
MAINTENANCE
Keep the tool clean and dry. Liquid can damage the runner.
Wipe the tool with a clean, dry cloth. Do not use solvents or the equivalent.
Switch off the tool when it is not in use, to save the battery.
Avoid contact with charged objects and/or electronic equipment.
Replacing the battery
The display flashes when the battery is flat. Open the battery compartment cover in the direction of the
arrow and remove the battery. Insert the new battery with the plus side outwards.
TROUBLESHOOTING
Problem
Cause
Action
The display flashes.
The battery is flat.
Replace the battery.
The value on the display does
not change when the runner is
moved.
The tool has locked.
Reset by removing the battery, wait 30
seconds and replace the battery.
Precision less than
+/- 0.001 mm.
Sensor is contaminated.
Release the runner and its casing and
carefully clean the sensor surface with
compressed air.
The display is blank.
The battery is not correctly
inserted.
Open the battery compartment and
check that the battery is correctly
inserted.
The battery is flat.
Replace the battery.
