EN
15
USE
1. Connect the sunblind to mains supply. The sunblind
gives an audio prompt.
2. Select channel position on the remote control with one
of the channel selectors (4).
FIG. 2
3. Press the pairing button (5) twice.
4. Press
˄
on the remote control until the audio signal
from the sunblind stops.
5. The remote control and the sunblind are now paired.
EXTENDING AND WITHDRAWING
• Press
˄
on the remote control to withdraw the sunblind.
• Press
–
on the remote control to stop it moving.
• Press
˅
on the remote control to extend the sunblind.
NOTE:
•
Do not run the sunblind for more than two
consecutive cycles, this will trip the overheating
protection in the motor. It will not be possible to
operate the sunblind with the remote control if the
overheating protection is activated. Allow the
sunblind to cool for about 30 minutes.
•
If there is a power cut the sunblind can be operated
manually with the handle.
Содержание 007591
Страница 3: ...1 1 2 3 5 4 4 2 ...
