Hard Head 006402, Руководство по эксплуатации

Страница: 24 / 33

EN
24
• Spirit level with magnetic mount
• Sleeve
• Set square
• Phillips screwdriver
• Cordless drill
• Tape measure
• Pen
• Concrete drill
FIG. 1
ACCESSORIES FOR ATTACHMENT/INSTALLATION
1. Hex screw M6 x 16
2. Nut M6
3. Plastic plug
4. Hex screw M8 x 16
5. Flat washer Ø 8
6. Spring washer Ø 8
7. Wood screw ST6 x 16
8. Countersunk screw M6 x 16
FIG. 2
WORKTOPS
1. Worktop 68 cm. Fits over cupboard. (part no. 006402)
2. Worktop 136 cm. Fits over two cupboards. (part no. 006403)
3. Worktop 204 cm. Fits over three cupboards. (part no. 006404)
4. Corner worktop (part no. 022783)
FIG. 3
END FASTENER / INTERMEDIATE FASTENER FOR
TOOL PANEL
1. End fastener for tool panel (part no. 006406)
2. Intermediate fastener for tool panel with corner position
(part no. 022804)
3. Intermediate fastener for tool panel (part no. 006407,
to be withdrawn)
FIG. 4
MAX LOAD
1. Storage cabinet with double door, 300 kg
2. Storage cabinet with single door, 180 kg
3. Wall cabinet, 15 kg
4. Tool panel, 10 kg
5. Tool cabinet with 2 doors, 60 kg
6. Tool cabinet with drawers, 150 kg
7. Waste cabinet, 90 kg.
FIG. 5
INSTALLATION
Take into consideration the power points in the room when
planning the configuration and installation.
INSTALLATION OF POSTS
FIG. 6
SAFETY INSTRUCTIONS
IMPORTANT:
Read these instructions carefully before installation and save
them for future reference.
WARNING!
•
The product is heavy!
• At least two persons are needed to lift and install the
product, otherwise there is a risk of back injury or other
personal injury.
• Never leave children unattended near the product.
SYMBOLS
Read the instructions.
TECHNICAL DATA
Overall size
Storage cabinet with double door W91.5xH200xD46 cm
Storage cabinet with single door W60xH200xD46 cm
Wall cabinet W68xH35xD28 cm
Wall mounted cabinet corner W86.4xH35xD86.4 cm
Tool cabinet with 2 doors W68xH91xD46 cm
Tool cabinet with drawers W68xH91xD46 cm
Waste cabinet (part no. 006413) W68xH91xD45.8 cm
Corner cabinet W86.4xH91xD86.4 cm
DESCRIPTION
HARD HEAD’S FLEXIBLE STORAGE SERIES
The series consists of different modules that can be bought
separately and built together to suit your needs.
• Storage cabinet with double door (part no. 006412)
• Storage cabinet with single door (part no. 006411)
• Wall cabinet (part no. 006410)
• Wall mounted corner cabinet (part no. 022782)
• Tool panel (part no. 022781)
• Tool panel for corner cupboard (part no. 022781)
• Tool cabinet with 2 doors (part no. 006414)
• Tool cabinet 5 drawers (part no. 006415)
• Tool cabinet 7 drawers (part no. 006416)
• Tool cabinet 9 drawers (part no. 006417)
• Waste cabinet (part no. 006413)
• Corner cabinet (part no. 022779)
• End fastener for tool panel (part no. 006406)
• Intermediate fastener for tool panel with corner position
(part no. 022804)
• Intermediate fastener for tool panel (part no. 006407,
to be withdrawn)
• Worktop 68 cm. Fits over cupboard. (part no. 006402)
• Worktop 136 cm. Fits over two cupboards. (part no. 006403)
• Worktop 204 cm. Fits over three cupboards. (part no. 006404)
• Corner worktop (part no. 022783)
TOOLS NEEDED FOR CORRECT INSTALLATION
• Adjustable spanner
• Combination spanner
• Cross-head bit