2 0
OPERATION INSTRUCTIONS CONT.
SETTING THE TIMER TO TURN ONE OR MORE COOKING ZONES OFF
Setting one cooking zone:
2. To cancel the timer, touch the ‘–’ or ‘+’
buttons together and the “- -” will show
in the minute display.
1. With the desired zone turned on, set
the time by touching the ‘–’ or ‘+’ timer
buttons of the corresponding cooking
zone you want to set the timer for.
Each touch will decrease or increase
by 1 minute increments.
Touch and hold the ‘–’ or ‘+’ buttons
to decrease or increase by 10 minute
increments.
3. When the time is set, it will begin to
count down immediately. The display will
show the remaining time and the timer
indicator will flash for 5 seconds.
4. The corresponding cooking zone will
automatically switch off when the
cooking time expires. The display will
show “H” for hot to indicate residual heat.
• If you want to change the time after the timer has been set, repeat the steps above from step 1.
• Other cooking zones will keep operating if they have been turned on prior to setting the timer.
• The diagrams shown in this user manual are for reference only, your product may appear differently.
NOTE:
• The red dot next to power level indicator will illuminate indicating that zone is selected.