DigiSnap 3000
Digital Camera Remote Controller
www.Harbortronics.com
11
9/25/03
Rev B
Playback Menu
This menu allow review of acquired images, and allows for their deletion and memory card formatting.
When the menu is entered, the camera will be configured to display the last image acquired.
T - Show Next Image
Displays the next image in memory. If the current image is the last one acquired, the camera will cycle to
the first image.
W - Show Previous Image
Displays the previous image in memory. If the current image is the first one acquired, the camera will cycle
to the last image.
N - Select Image
Given a large number of images in memory, it may be much faster to index to a particular image number.
The first picture acquired is 1, and so on up to the last image. This command requests which image number
is of interest, and then displays that image.
O - Delete Image
The currently displayed image is deleted, after a positive confirmation.
E - Erase All Images
All of the images on the memory card are erased, after a positive confirmation. Note that this is somewhat
different than reformatting the memory card, in that if images are present on the card that were previously
protected, those images will not be erased, whereas if re-formatted, everything on the memory card will be
eliminated.
F - Reformat Memory
Reformats the memory card, after a positive confirmation. All information on the card will be destroyed,
and the directory structure re-established.
Q - Quit to Main Menu
Return to the main menu, where images can be acquired. Note that if supported by the camera, the
extended protocol will be used, which may add a slight delay.
Configuration Menu
The DigiSnap 3000 has a host of user accessible configurations, controlling the camera, power
management, temperature monitoring, etc. This menu is the entry point to accessing these configurations.
C - Camera Menu
Switch to the camera configuration menu.
D - DigiSnap Operation Menu
Switch to the DigiSnap configuration menu.
T - Time-Lapse Menu
Switch to the Time-Lapse configuration menu.
