Page 5
For technical questions, please call 1-888-866-5797.
Item 63785
1. Determine which DINSE Connector is appropriate
for your welding system. For OMNIPRO 220 and
PROTIG 200 welders, use the 35-50 Connector. For
PROTIG 165 welders, use the 10-25 Connector.
2. Slide rubber sleeve on TIG Torch hose
back to expose threaded tip.
3. Screw DINSE Connector onto
threaded tip of TIG Torch hose.
4. Position rubber sleeve so that ridges align
with grooves on DINSE Connector.
5. Slide rubber sleeve over DINSE Connector
leaving only the end exposed. Apply enough
force to lock rubber sleeve onto Connector.
10-25 DINSE
Connector
35-50 DINSE
Connector
TIG Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch off and unplug the Welder before setup.
TIG Setup
Connect DINSE
