background image

SKU 94903     For technical questions please call 1-800-444-3353 

Page 3  

do not overreach

.  Keep proper footing and balance at all times. Do not reach over 

or across running machines.

Maintain tools with care

.  Keep tools maintained and clean for better and safer 

performance. The handles must be kept clean, dry, and free from oil and grease at 

all times.

Avoid unintentional starting

.  Be sure the switch is in the Off position when not in 

use. Do not carry any tool with your finger on the start switch.

Stay alert

.  Watch what you are doing, use common sense. Do not operate any tool 

when you are tired.

Take caution as some woods contain preservatives such as copper chromium 

arsenate (ccA) which can be toxic

. Some metals and other materials can be toxic 

when burned. When cutting or burning these materials extra care should be taken to 

avoid inhalation and minimize skin contact.

check for damaged parts

.  Before using any tool, any part that appears damaged 

should be carefully checked to determine that it will operate properly and perform 

its intended function. Check for alignment and binding of moving parts; any broken 

parts or mounting fixtures; and any other condition that may affect proper operation. 

Any part that is damaged should be properly repaired or replaced by a qualified 

technician. Do not use the tool if any switch does not turn On and Off properly.

guard against burns

.  This tool and your work materials will become very hot when 

in use. Prevent body contact with hot surfaces by using safety equipment such as 

gloves. Provide for cooling trays for tools and work materials.

replacement parts and accessories

.  When servicing, use only accessories 

intended for this tool.

Do not operate tool if under the influence of alcohol or drugs

.  Read warning 

labels on prescriptions to determine if your judgment or reflexes are impaired while 

taking drugs. If there is any doubt, do not operate the tool.

Maintenance

.  For your safety, service and maintenance should be performed regu-

larly by a qualified technician.

The brass components of this product contain lead, a chemical known to the 

State of california to cause birth defects (or other reproductive harm). (cali-

fornia health & Safety code 25249.5, 

et seq.

)

WArning: The warnings, cautions, and instructions discussed in this instruc-

tion manual cannot cover all possible conditions and situations that may 

occur. it must be understood by the operator that common sense and caution 

are factors which cannot be built into this product, but must be supplied by 

the operator.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

Содержание TORCH KIT 94903









Отзывы: