Page 3
For technical questions, please call 1-888-866-5797.
Item 58005
SA
FE
TY
OP
ERA
TI
O
N
MAINT
ENANC
E
SE
TUP
Electrical safety
1.
Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with grounded
power tools.
8QPRGLILHGSOXJVDQGPDWFKLQJ
outlets will reduce risk of electric shock.
2.
Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of
electric shock if your body is grounded.
3.
Do not expose power tools to rain or wet
conditions.
:DWHUHQWHULQJDSRZHUWRRO
will increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric shock.
5.
If operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply.
Use of a GFCI reduces the risk of electric shock.
Personal safety
1.
Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power
tool while you are tired or under the
influence of drugs, alcohol or medication.
$PRPHQWRILQDWWHQWLRQZKLOHRSHUDWLQJSRZHU
WRROVPD\UHVXOWLQVHULRXVSHUVRQDOLQMXU\
2.
Use personal protective equipment.
Always wear eye protection.
Safety
HTXLSPHQW
such as dust mask, non-skid safety shoes,
KDUGKDWRUKHDULQJSURWHFWLRQXVHGIRUDSSURSULDWH
FRQGLWLRQVZLOOUHGXFHSHUVRQDOLQMXULHV
3.
Prevent unintentional starting. Ensure the
Trigger is in the off-position before connecting
to power source, picking up or carrying the tool.
&DUU\LQJSRZHUWRROVZLWK\RXUILQJHURQ
WKH7ULJJHURUHQHUJL]LQJSRZHUWRROVWKDW
have the Trigger on invites accidents.
4.
Do not overreach. Keep proper footing and
balance at all times.
This enables better control
RIWKHSRZHUWRROLQXQH[SHFWHGVLWXDWLRQV
5.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing
and gloves away from hot parts.
6.
Only use safety equipment that has been
approved by an appropriate standards agency.
8QDSSURYHGVDIHW\HTXLSPHQWPD\QRWSURYLGH
DGHTXDWHSURWHFWLRQ(\HSURWHFWLRQPXVWEH
$16,DSSURYHGDQGEUHDWKLQJSURWHFWLRQ
PXVWEH1,26+DSSURYHGIRUWKH
VSHFLILFKD]DUGVLQWKHZRUNDUHD
Power tool use and care
1.
Do not force the power tool. Use the
correct power tool for your application.
7KHFRUUHFWSRZHUWRROZLOOGRWKHMREEHWWHUDQG
safer at the rate for which it was designed.
2.
Do not use the power tool if the Trigger
does not turn it on and off.
$Q\SRZHUWRROWKDWFDQQRWEHFRQWUROOHGZLWKWKH
7ULJJHULVGDQJHURXVDQGPXVWEHUHSDLUHG
3.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
6XFKSUHYHQWLYHVDIHW\PHDVXUHVUHGXFHWKH
ULVNRIVWDUWLQJWKHSRZHUWRRODFFLGHQWDOO\
4.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
5.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents
DUHFDXVHGE\SRRUO\PDLQWDLQHGSRZHUWRROV
6.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
SRZHUWRROIRURSHUDWLRQVGLIIHUHQWIURPWKRVH
intended could result in a hazardous situation.
