SKU 95122
For technical questions please call 1-800-444-3353
Page 3
7.
use eye and ear protection
. Always wear ANSI approved impact safety
glasses and full face shield.
8.
do not overreach
. Keep proper footing and balance at all times. Do not
reach over or across running machines.
9.
Maintain tools with care
. Keep tools maintained and clean for better
and safer performance. Follow instructions for lubricating and changing
accessories. The handles must be kept clean, dry, and free from oil and
grease at all times.
10.
stay alert
. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
11.
check for damaged parts
. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician.
12.
replacement parts and accessories
. When components are damaged,
use only identical replacement parts. Use of any other parts will void the
warranty. Only use accessories intended for use with this tool.
13.
do not operate tool if under the influence of alcohol or drugs
. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
14.
Maintenance
. For your safety, service and maintenance should be
performed regularly by a qualified technician.
warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
it must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Brought to You by www.snapwhole.com
