Page 5
For technical questions, please call 1-888-866-5797.
Item 64983
Maintenance and Servicing
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal
noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1.
BEFORE EACH USE,
inspect the general
condition of the Gear Puller. Check for loose
screws, misalignment or binding of moving
parts, cracked or broken parts, and any other
condition which may affect its safe operation.
2.
AFTER USE,
clean external
surfaces with clean cloth.
3. Lightly oil the threads and pivoting joints
periodically to keep them operating smoothly.
4. Keep Piston (2) in the fully retracted position
while in storage to prevent rust or damage.
5. If rust appears on any part of the tool,
remove it with a penetrating oil.
6. If the tool fails to perform adequately, the oil
level in the system should be checked and
air purged from the system, as follows:
Note:
This procedure should
ONLY
be
performed by a qualified technician.
a. Remove the Pump Handle Socket (12).
b. Using an oil gun, pour oil slowly into
the pump housing to overflowing.
c. Reassemble, and wipe excess
oil from the tool
.
