background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 64983

Specifications

Pressure 
Capacity

5 Tons (10,000 lb)

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to 

potential personal injury hazards.  Obey all safety messages 

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Important Safety Information

  WARNING Read all safety warnings and instructions.  

Failure to follow the warnings and instructions may result in serious injury.   

Save all warnings and instructions for future reference

.

1.  Wear ANSI-approved safety 

goggles during use.

2.  Use as intended only.

3.  Inspect before use; do not use 

if parts loose or damaged.

4.  The warnings, precautions, and instructions 

discussed in this instruction manual cannot 
cover all possible conditions and situations 
that may occur.  It must be understood by 
the operator that common sense and caution 
are factors which cannot be built into this 
product, but must be supplied by the operator.

 SAVE THESE INSTRUCTIONS.

Содержание Pittsburgh 64983









Отзывы: