background image

Page 7

For technical questions, please call 1-888-866-5797.

Item 61796

Operating Instructions

  Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this 

manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: 
Turn the Switches of the heater off, unplug the heater from its electrical outlet, and allow 
the heater to cool completely before performing any procedure in this section.

1.  Place Heater on dry, hard, stable floor away from 

combustible materials.  DO NOT USE ON CARPET.

Note:

 If the Heater is tilted at a 45° or greater 

angle, the tip-over switch will issue a warning 
sound and the heater will shut off. 

2.  Supervise children closely when near heater.
3.  Keep pets away from heater.

Controls

Note:

  Controls are located on the 

side of the Heater housing. 

OFF

ON

LOW HEAT

HIGH HEAT

Figure B:  Control Panel

1.  On/Off:  Switch to 

I

 position to turn the 

unit on and enable the flame effect.

2.  Low Heat:  Switch to 

I

 position to 

turn the heater and fan on low.  

Note:

 Low Heat must be on to use High Heat.

3.  High Heat:  Switch to 

I

 position to set 

the heather and fan on high.

Note:

 If heater reaches an unsafe temperature 

(212°F/100°C) the Temperature Limiting Control 
will automatically turn the Heater off.

4.  To reset:

a.  Unplug the power cord from the outlet. 
b.  Turn the ON/OFF switch to OFF.
c.  Wait 5 minutes. 
d.  Inspect the fireplace to make sure no vents 

are blocked, or clogged with dust or lint. If they 
are, use a vacuum to clean the vent areas.

e.  With the POWER switch in the OFF position, 

plug the power cord back into the outlet.

General Operating Instructions

1.  To prevent accidental operation, turn the 

Switches off, then plug the heater into a 
grounded 120VAC electrical outlet.

2.  Adjust the controls as desired.

3.  After use, to prevent accidents, turn the Switches off, 

and unplug the power cord.

WARNING!  Do not leave the heater 
unattended while switched on.

WARNING!  TO PREVENT SERIOUS INJURY:  
Allow Heater to cool completely before cleaning 
or storage.

  Once cool, clean, then store the 

heater indoors out of children’s reach.

Содержание One Stop Gardens Winter 61796













Отзывы: