Harbor Freight Tools Haulmaster Скачать руководство пользователя страница 17

Страница: 17 / 28

Page 17

For technical questions, please call 1-888-866-5797.

Item 58703

aint

nan

SSEMBL

Connection (continued)

4. With assistance, place the Hitch Coupler

over the vehicle’s hitch ball and pull back on
the Trigger and push down on the Handle
until the Trigger locks in the slot.

Hitch Ball

(not included)

Handle

trigger

adjusting

nut

5. Pull up and down on the Coupler to make sure the

hitch ball is fitting snugly in the Coupler. There must
be no play between the hitch ball and Coupler.

WarninG! tO prEVEnt SEriOUS
inJUry:

If there is play, tighten the

Adjusting Nut until no play is present.
After unlocking the Handle, press back on the
nut retaining plate (holding the Adjusting Nut in
place) while the Nut is tightened. After the Nut
is tightened,

the retaining plate must fit in

place against the flats of the nut to prevent
it from moving

. This adjustment should

be done by two people. If the Adjusting Nut
is too tight, the Handle will not lock.

6. After the Adjusting Nut is properly adjusted,

pull back on the Trigger and push down on
the Handle until the Trigger locks in the slot.

pull up on Handle firmly

to make sure the Trigger

is locked in place and the Handle cannot move.

replace the Locking pin and r-Clip.

7. Attach the Safety Chain to the towing vehicle’s rear

bumper or frame with equal length on each side.
Allow just enough chain length for unrestricted
turning without dragging chain on the ground.

8. Connect the Wiring Harness to the

towing vehicle’s 12VDC system.

note:

Consult the operator’s manual of the towing

vehicle for proper connection instructions.

9. When towing the Trailer over long

distances stop and check the tightness
of all connections, Side Running Lights,
and Tail Lights

at least

every 100 miles.

10. Carry emergency flares and fire

extinguisher, if required for operation in
your state. Carry extra fuses if towing the
Trailer at night over long distances.

Содержание Haulmaster





























Результаты поиска

Содержание Haulmaster

Отзывы:

Похожие инструкции для Haulmaster

Бренды по названию

Популярные бренды

Harbor Freight Tools Haulmaster, Руководство пользователя и инструкции по безопасности

Результаты поиска

Содержание Haulmaster

Отзывы:

Похожие инструкции для Haulmaster

Бренды по названию

Популярные бренды