Page 3
For technical questions, please call 1-888-866-5797.
Item 59665
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
WARNING!
TO PREVENT SERIOUS INJURY: Axle stabilizers are intended for stabilization
only and will not prevent a trailer from rolling. Trailer must be parked and leveled with tires
chocked in front and back on both sides of the trailer before using stabilizers.
Installation
NOTICE:
Stabilizers must be placed vertically
between tires, if placed horizontally, tire
damage or rocking may occur.
1. Place a Stabilizer vertically between two tires so
the Pads will make contact with the tire treads
and tighten Bolt Wings by hand until snug.
Note:
Stabilizers can be flipped upside down
if fenders are causing interference.
2. Use included Wrench to tighten
Adjustment Bolt (clockwise) until Stabilizer
is wedged firmly between tires.
NOTICE:
Adjustment Bolt must be
fully tightened with Wrench.
3. Repeat steps 1-2 for other side of trailer.
WARNING!
TO PREVENT SERIOUS
INJURY: Be sure to remove Stabilizers
before hitching, lifting, or moving trailer.
Removal
Use included Wrench to loosen Adjustment Nut
(counterclockwise) and remove Stabilizers.
Record Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
Note:
Replacement parts are not available for this item. Refer to UPC 193175478085.
