Page 6
For technical questions, please call 1-888-866-5797.
Item 64827
3. Pull the Pedal Release out and swing the
Pedal up against the Work Station.
Pedal Release
Pedal
Figure J
4. Swing the Foot Lock Lever open and
fold the Rear Foot against the Rear Leg.
Swing the Rear Leg Lock Lever open and fold
the Rear Leg against the Work Station, aligning
it with the indent shown in the illustration.
Rear Foot
Foot Lock
Lever
Rear Leg
Rear Leg
Lock Lever
indent for
Rear Leg
Figure K
5. Slide the Rear Leg up into the indent and swing
the Rear Leg Lock Lever closed to secure it.
Rear Leg
Rear Leg
Lock Lever
Figure L
Maintenance
TO PREVENT SERIOUS INJURY FROM TOOL
FAILURE: Do not use damaged equipment.
If abnormal noise or unexpected movement occurs,
have the problem corrected before further use.
1.
BEFORE EACH USE,
inspect the general
condition of the tool. Check for:
• loose hardware or housing,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. If clamp does not move smoothly, lubricate under
the Sliding Jaw using general purpose grease.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
