Page 3
For technical questions, please call 1-888-866-5797.
Item 63401 63402
Specifications
63401
63402
Electrical Rating
120 VAC / 60 Hz / 1.3 A 120 VAC / 60 Hz / 2.45 A
Power Cord Length
16'
16'
Maximum Flow @ 0'
2500 GPH
4500 GPH
Maximum Head lift @ 0 Flow
19'
23'
Discharge Port
1/2" NPT Thread
2" NPT Thread
Installation
The submersible motor pump must be installed in a stationary position with either:
a. A fixed pipeline or
b. A flexible hose pipe.
6 FT. minimum
6 IN. minimum
1. Submerge the pump under water to
prevent the pump from taking in air.
2. The pond must be at least 6 feet
away from the receptacle.
3. To reduce wear on the pump, place the
pump on a platform above mud, sand,
small rocks, and other debris.
4. If running with fountain jets, the pump must be
mounted firmly and horizontally on a platform.
5. Connect a discharge hose (not included)
to the Hose Adapter (3).
6. Connect the free end of the discharge hose to a
waterfall basin, or similar device (none included).
Please note!
1. Do not install the pump by suspending it
unsupported from its delivery pipe or power cord.
The pump must be suspended from the handle
or be placed on the bottom of the basin.
To ensure that the pump works properly, keep the
bottom free from sludge and dirt of all kinds.
2. If the water level sinks too low, any sludge in the
basin will dry out and stop the pump from starting.
To help ensure the pump will start as required,
check the pump regularly with start-up tests.
Power Supply
1. The Pump is equipped with a shock-
proof plug according to regulations. The
Pump is designed to be connected to a
120 VAC, 60 Hz GFCI protected socket.
2. Make sure that the socket is sufficiently
secured and is in excellent condition.
3. When the plug is inserted into the socket,
the pump will be on standby.
4.
WARNING: To prevent death from electric
shock, pump must be connected only to
a GFCI protected outlet.
WARNING!
If the power cord or plug is damaged,
do not use the pump. The power cord or plug
may only be repaired by a certified electrician.
WARNING!
Pump must be positioned with a
drip loop, as discussed under WARNING.
Areas of use
1. This pump is designed to pump fresh water only.
2. This pump is designed to be used for:
An area not used for swimming.
