IMpORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
Assembly precautions
1.
Do not assemble in windy conditions.
2.
Assemble and install only on
flat, level, hard surface.
3.
Assemble and anchor only according to
these instructions. Improper assembly or
inadequate anchoring can create hazards.
4. Check for utility lines, tree branches and
other structures before assembling.
5. Verify that installation surface has no
hidden utility lines before anchoring.
6. Wear ANSI-approved safety goggles,
heavy-duty work gloves and hard hat
during assembly and service.
7. Keep assembly area clean and well lit.
8. Keep bystanders out of the area during assembly.
9. Do not assemble when tired or when under
the influence of drugs or medication.
10. Product capabilities apply to properly and
completely assembled product only.
use precautions
1.
CARBON MONOXIDE HAZARD
using an engine inside Shed
CAN KILL YOu IN MINuTES.
Engine exhaust contains
carbon monoxide. This is a poison
you cannot see or smell.
NEVER use an engine inside Shed,
EVEN IF cover is open.
Only use an engine OUTSIDE and far away from
Shed.
2.
DO NOT uSE IN HIGH WIND. Remove cover
if harsh weather or heavy rain threatens.
3.
For temporary use only.
Do not use for long-term shelter.
4.
Do not use as tent. Does not meet tent
flammability standards. Do not use grill, heater,
or ignition sources inside or near cover.
5.
Do not allow snow, rainwater or debris
to accumulate or pool on cover.
6.
Do not hang objects from any part of the Garage.
7. This product is not a toy. Do not allow
children to play with or near this item.
8. Use as intended only.
9. Inspect regularly, tighten all loose hardware
and loose straps, and secure all loosened
anchors. If any parts are damaged, bent, or
stretched, they must be replaced. Hardware
may loosen during normal operation stresses.
Loose hardware or damaged/altered parts will
compromise the structural integrity of this product.
10. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE INSTRuCTIONS.
Page 3
For technical questions, please call 1-888-866-5797.
Item 62859
S
AFETY
Op
ERA
TION
M
AINTENANCE
S
ET
up
Page 3
For technical questions, please call 1-888-866-5797.
Item 62859
