SKU 93432
For technical questions, please call 1-800-444-3353.
Page 11
To Install A Screwdriver Bit:
1.
The chuck of the Screwdriver is a self-locking type. When a screwdriver bit (not
included) is inserted, the chuck will grip it automatically. If the bit is not long
enough for the chuck to securely grip, connect a magnetic extension rod (not
included) to the bit. To remove a bit, with a gloved hand, firmly pull the bit from
the Chuck.
(See Figure F.)
FIGURE F
SCREWDRIVER BIT
(NOT INCLUDED)
CHUCK
The Forward/Reverse Switch:
1.
For a clockwise rotation of the Screwdriver, squeeze the
TOP
portion of the
Forward/Reverse Switch (49). For a counterclockwise rotation, squeeze the
BOTTOM
portion of the Forward/Reverse Switch. When the tool is not in use,
make sure the Forward/Reverse Switch is in its
“PAUSE”
(middle) position.
(See Figure G.)
FORWARD/REVERSE SWITCH
(49)
FIGURE G
CLUTCH CAP
(7)
