THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model
Purchase Date
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Tool Name:
Steel Blaster Cabinet
SKU:
39170
Construction:
Heavy Duty 12 and 18 gauge steel
Capacity
40 Lb.
Arm Hole Openings:
7 inch
Work Area:
33-1/4" x 22- 1/8" x 21-1/2"
Overall Dimensions
36-3/4" x 45-1/2" x 10-3/4"
Air Requirement:
5 HP compressor with minimum 12 CFM at 40 to 80 PSI.
Net Weight:
105-1/2 Lbs.
Included with the Cabinet are: Gun with 1/4” Ceramic Nozzle, 3/8 Hose Diameter and sandblasting gloves. Also
Fluorescent Light System (15 DC Volt) and 2-1/2” diameter Dust Port (dust removal system not included).
Accessories also include: 2 Air Jets to fit nozzle sizes 3/16", 13/64", 15/64", 17/64" and a 3-MM Hex Wrench.
Warning:
The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that COMMON SENSE AND CAUTION ARE
FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT
MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective gloves and non-skid footwear is recommended.
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Maintain proper footing and balance at all times.
Do not abuse the power cord. Do not yank on cord to disconnect it from outlet. Keep the cord away from heat,
oil and sharp edges.
#39170
Page 2
Rev 01/01
Brought to You by Augusta Flint
