SKU 98250
For technical questions, please call 1-800-444-3353.
Page 11
Replace Belt Cover (20) and thread
8.
in all screws to secure in place.
Setting Belt Deflection
Belt deflection should be between
1.
3/4” to 1-1/2”
Press on the Belt with your thumb at
2.
a point between both pulleys. The
amount that the belt moves from its
static position (straight line) is the
measure of deflection. Measure
deflection with a caliper (not included)
or straight edge (not included).
cleaning, maintenance, and
lubrication
BeFore each uSe,
1.
inspect the
general condition of the Pottery
Wheel. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
Check the condition of the Belt every
2.
six months.
aFter uSe,
3.
clean external surfaces
of the tool with clean cloth.
4.
Warning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
PleaSe read the FolloWing
careFully
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROvIDED THE PARTS LIST AND
ASSEMBLy DIAgRAM IN THIS MANUAL AS
A REfERENCE TOOL ONLy. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE
IS qUALIfIED TO MAkE ANy REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS qUALIfIED
TO REPLACE ANy PARTS Of THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAkEN By CERTIfIED
AND LICENSED TECHNICIANS, AND NOT By
THE BUyER. THE BUyER ASSUMES ALL RISk
AND LIABILITy ARISINg OUT Of HIS OR HER
REPAIRS TO THE ORIgINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISINg
OUT Of HIS OR HER INSTALLATION Of
REPLACEMENT PARTS THERETO.
