Page 4
SKU 96933
For technical questions, please call 1-800-444-3353.
wiring
note:
Some towing vehicles may already have a 4-way Flat Connector, “Trunk” plug
wired in. For those vehicles, skip the following wiring instructions.
if you do not have experience
doing this type of automotive
electrical wiring or if the
wiring in your vehicle differs
from that explained below,
have an automotive service
technician connect the wiring.
Identify the towing vehicle’s wires
1.
in the trunk that correspond to
the circuits indicated in the Wiring
Color Code diagram to the right.
The white ground wire from the
Pigtail (22) may be connected to a
bolt or appropriate component on
the vehicle to establish a ground
instead of a ground wire.
2.
Connect the wires from the Wiring Pigtail (22) to the proper vehicle circuit wires
using Wire Splices (21). When the supplied splices are used, generally no wire
stripping or cutting would be
required. Follow these three steps
and refer to the illustration to the
right:
Insert the end of the Pigtail (22)
a.
wire into the ‘dead-end’ channel
of the Splice. Insert the wire
all the way to the end of the
channel as shown.
Place the Splice around the
b.
correct vehicle circuit wire.
Make sure both wires stay
c.
properly in place while the
cover is closed until it snaps
together.
wiring color code
note:
This is the wiring configuration of the
“Trunk” 4-way Flat Connector (23). The
towing vehicle may have a different wir-
ing color code.
white
Ground
Brown
Running Lights
Yellow
Left Stop and
Turn Lights
green
Right Stop and
Turn Lights
“trunk” 4-way Flat
connector (23)
wiring
pigtail (22)
wire Splice (21) usage
B) place splice around
vehicle wire
c) close Splice
cover securely
a) insert pigtail (22) wire
into ‘dead-end’ channel
unpacking
When unpacking, check to make
sure that the item is intact and undam-
aged. If any parts are missing or bro-
ken, please call Harbor Freight Tools at
the number shown on the cover of this
manual as soon as possible.
SpeciFicationS
Electrical
Requirements 12 VDC 4.3 A
Bulb Type
12 VDC 21/5 W
(#1157 Type)
Connector
4-way Flat
