Harbor Freight Tools 95082 Скачать руководство пользователя страница 6

Страница: 6 / 21

SKU 95082

For technical questions, please call 1-800-444-3353.

Page 6

SAVE tHESE

iNStRuctiONS.

gROuNdiNg

tO PREVENt

ELEctRic SHOcK

ANd dEAtH FROm

iNcORREct gROuNdiNg

WiRE cONNEctiON:

Check with a qualified

electrician if you are in doubt

as to whether the outlet is

properly grounded. do not

modify the power cord plug

provided with the tool. Never

remove the grounding prong

from the plug. do not use the

tool if the power cord or plug

is damaged. if damaged, have

it repaired by a service facility

before use. if the plug will not

fit the outlet, have a proper

outlet installed by a qualified

electrician.

grounded tools: tools with three

Prong Plugs

Tools marked with “Grounding

Required” have a three wire cord

and three prong grounding plug.

The plug must be connected to a

properly grounded outlet. If the tool

should electrically malfunction or

break down, grounding provides a

low resistance path to carry electricity

away from the user, reducing the risk

of electric shock.

(See 3-Prong Plug

and Outlet.)

The grounding prong in the plug is

connected through the green wire

inside the cord to the grounding

system in the tool. The green wire

in the cord must be the only wire

connected to the tool’s grounding

system and must never be attached

to an electrically “live” terminal.

(See

3-Prong Plug and Outlet.)

The tool must be plugged into an

appropriate outlet, properly installed

and grounded in accordance with all

codes and ordinances. The plug and

outlet should look like those in the

preceding illustration.

(See 3-Prong

Plug and Outlet.)

double insulated tools: tools

with two Prong Plugs

Tools marked “Double Insulated”

do not require grounding. They

have a special double insulation

system which satisfies OSHA

requirements and complies with the

applicable standards of Underwriters

Laboratories, Inc., the Canadian

Standard Association, and the

Содержание 95082






















Результаты поиска

Содержание 95082

Отзывы:

Похожие инструкции для 95082

Бренды по названию

Популярные бренды

Harbor Freight Tools 95082, Руководство по установке и эксплуатации

Результаты поиска

Содержание 95082

Отзывы:

Похожие инструкции для 95082

Бренды по названию

Популярные бренды