Page 3
SKU 93691
For technical questions, please call 1-800-444-3353
9.
Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before plugging it in.
10.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool when you
are tired.
11.
Check for damaged parts
. Before using any tool, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and
any other condition that may affect proper operation. Any part that is damaged should be
properly repaired or replaced by a qualified technician.
12.
Replacement parts and accessories
. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool. Approved accessories are available from Harbor Freight Tools.
13.
Do not operate tool if under the influence of alcohol or drugs
. Read warning labels if
taking prescription medicine to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
14.
Maintenance
. For your safety, service and maintenance should be performed regularly by a
qualified service technician.
Product Specific Safety Precautions
1.
Moving parts can cause injury
. Keep hands, hair, loose clothing, and tools away from
moving parts of the Hitch. Keep spectators away at a safe distance.
2.
Use the Hitch on a proper surface
. Locate on a flat, level, and solid surface that is capable
of supporting the weight of the Hitch and attached implement, plus the load.
3.
Avoid accidents while using the Hitch and its attached implement
.
This product is for
off-road use only.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by the op-
erator that common sense and caution are factors which cannot be built into this product, but
must be supplied by the operator.
Unpacking
When unpacking, check to make sure the following parts are included. Refer to the photo on the
next page, and the Assembly Drawing and Parts List at the end of this manual.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual as soon as possible.
