SKU 90959
Page 4
Taking Pictures with the Camera
1.
Open the Lens (10) on the front of the Camera by sliding the Lens Opening
Lever (11) to the left until the Lens opens. Choose the far left position (Flash
On) if indoor or the center position (Flash Off) if out-of-doors. Look through the
Viewfinder (12) on the back of the Camera. Choose your shot.
If using the
flash, wait for the Flash Indictor Light to be fully lit. Press the Trigger Button (9).
The film will automatically advance to the next frame for your next shot.
(
See Figures 4 & 5)
.
Figure 4
Figure 5
Trigger
Button (9)
Lens (10)
Lens Opening Lever
Flash ON or Off (11)
Viewfinder (12)
2.
When you have completed all the photo shoots you wished to take on the
35MM roll of film, slide the Lever (11) right, closing the lens cover, then press
the rewind button on the back of the camera. After the film has stopped
rewinding, you can open the back of the Camera and take out the exposed film
from the Loading Slot (7). Caution: Opening the Camera before it is rewound
will expose the film to light and cause damage to the film.
(See Figure 6).
Note: To reduce “red eye”, press the Trigger Button (9) partially down and a red light
will show on the front of the Camera. Finish pressing the Trigger Button and
proceed taking your photo.
(See Figure 4).
Harbor Freight is not responsible
for improper loading of film or improper exposure due to incorrect lighting. With
practice you will be able to perfect your ability to take quality photos.
Back of
Camera
Maintenance
1.
Keep Camera dry. Do not use if it is raining. Keep in Carrying Case when not in
use.
2.
Close the Lens Cover (10) by sliding the Lever (11) to the right when not in
use. This will prevent scratches on the Lens.
Red Eye
Reduction Light
Film Rewind
Figure 6
Flash Indicator Light
