Page 5
For technical questions, please call 1-800-444-3353.
SKU 68758
or medication to the water. It will
cause the unit to malfunction.
note:
Distilled water is recommended.
3. Replace the fill cap and
turn clockwise to tighten.
Do not over tighten.
4. Set the Water Tank back in
place, making sure that the
Tank is correctly aligned with
the body of the Humidifier.
5. Plug the unit into a 120V outlet.
6. Turn the Power Switch
clockwise to turn on the unit.
7. Adjust the mist intensity
by continuing to turn the
Power Switch clockwise.
8. Once the Water Tank is in place,
do not attempt to pick up or
move the Humidifier. If you need
to move the Humidifier, unplug
the unit and drain the water
from the base before moving.
9. Pay attention to the water
level, adding more water
when the level is low.
10. To eliminate excessive humidity,
especially in smaller rooms, leave
the room door open and adjust
the Mist Intensity Control.
note:
It is best to keep the humidity
level between 30 and 50 percent.
The comfort level of humidity will
vary from room to room and with
changing room conditions.
In cold weather, windows and walls
may fog from excessive indoor
humidity. Too much humidity in
the room may allow moisture to
accumulate on surfaces where
bacteria and fungi can grow.
automatic shut-off
The Humidifier is equipped with
an automatic shut‑off feature.
If the unit runs dry and the unit
becomes hot, the unit will stop
working. If this happens, turn off
and unplug the Humidifier. Let
the unit cool down, then refill with
water and plug in to an outlet.
Turn on to resume operation.
Do not run the Humidifier
without water in the reservoir.
