Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR
WORK AREA IS:
Free of damp, wet or rainy conditions.
Free of children (do not let them handle tools or machinery).
Well-lit.
Clean and uncluttered.
Before Assembly and Use
Before using any tool, any part that appears damaged should be carefully checked to
determine that it will operate properly and perform its intended function.
Before setting up your Workbench, check for damaged parts.
Before use, make sure all bolts are tight.
Tools Required
(Not Included)
Phillips Head Screwdriver, 7mm and 10mm Open/Box Wrench (or adjustable wrench),
Needle-nose Pliers, Small Hammer, 7/64” Drill-bit, Drill.
Unpack and Check Contents
When unpacking your Workbench- 48” x 19”, check to make sure the parts listed below are included.
If any parts are missing or broken, please call
HARBOR FREIGHT TOOLS
at
1-800-444-3353.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT
OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
SKU 6843
Page 3
