Harbor Freight Tools 42848, Руководство по сборке и эксплуатации, Страница: 3 / 7

Page 3 SKU 42848
9. Check for damaged parts . Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for any condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician.
10. Replacement parts and accessories . When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
11. Maintenance . For your safety, service and maintenance should be performed
regularly by a qualified technician.
Note: Performance of the Solar Panels may vary depending on site location, angle of Solar
Panels in relation to the arc of the Sun, and available sunlight.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the parts listed on page 5 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Assembly
1. Connect the Bottom Link Bar (3) to the Left Triangle Frame (1) and the Right Triangle
Frame (2) using the attached bolt and hook.
2. Connect the Upper Link Bar (4) to the Left Triangle Frame (1) and the Right Triangle
Frame (2) using the attached bolt and hook.
3. Tighten both frame bolts to stabilize the frame assembly.
4. Locate the frame assembly so that if faces the sun the greater part of the day.
Bottom Link Bar (3)
Left Triangle Frame (1)
Right Triangle Frame (2)
Upper Link Bar (4)