SKU 42606
For technical questions, please call 1-800-444-3353.
Page 5
Step 1)
Place each of the 14-3/4" Left Panel Slides (2) onto the Left Slide Panel (6a) with the end with
the round hole facing forward. Align the tabs with the slots. The end tab should slide into place
while the two downward facing tabs are pushed down into the slots - see Figure 2.
Note:
Place the 14-3/4" Left Panel Slides (2) onto the Left Slide Panel (6a) starting with the bottom
holes. Leave a space between each Panel Slide (2).
Step 2)
Repeat step 1, only installing the Right Panel Slides (1) to the Right Slide Panel (6b) instead.
Step 3)
Slide each of the 16" Right Hand Drawer Slides (3) onto the Drawers (7). Align the tabs so the
hole at the end of the Drawer Slide is facing forward. Slide the end tab in and push up on the
up facing tabs-See Figure 3.
Step 4)
Slide each of the 16" Left Hand Drawer Slides (4) onto the Drawers (7). Align the tabs so the
hole at the end of the Drawer Slide is facing forward. Slide the end tab in and push up on the
up facing tabs-See Figure 3.
Step 5)
Slide the Spring Slide (5) into the 14-3/4" Slides (1 & 2) which are attached to the Slide Panels
(6). Push in until the Spring tip rides over the spring stop. Make certain that the Spring is
facing away from the position that the drawers will be in when inserted. The tip of the Spring
works to secure the Drawers (7) in the Drawer Slides.
REV 09/05
Round
Hole
Front
Figure 3
Rail extends
beyond Drawer
Left Slide Panel (6a)
Figure 2
