11
BLADE INSTALLATION
CANOPY HOUSING INSTALLATION
WARNING
To avoid possible fire or shock, make
sure that the electrical wires are com-
pletely inside the canopy housing and
not pinched between the housing and
the ceiling.
1. Remove one of the two shoulder screws in the
hanger bracket (C). Loosen the second
shoulder screw without fully removing it.
Assemble ceiling canopy (E) by rotating key
slot over shoulder screw in hanger bracket (C).
Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was
previously removed. (Fig. 1)
1
E
2.
Securely attach and tighten the canopy
screw cover (F) over the shoulder screws in
the hanger bracket (C), utilizing the keyslot
twistlock feature. (Fig. 2)
2
F
1.
Remove and discard the five rubber motor
stops from the motor assembly (A) by remov-
ing the screws. (Fig. 1)
CAUTION
Do not connect fan blades until the fan is
completely installed. Installing the fan with
blades assembled may result in damage to
the fan blades.
1
