17
Lowes.com/harborbreeze
OPERATING INSTRUCTIONS
2. Remove the battery cover from the remote (N)
and install the battery (Q), ensuring the polarity of
the battery (Q) matches the polarity in the battery
compartment. Replace the battery cover.
Note:
When it is time to replace battery (Q), use a 12-volt
battery.
CAUTION:
If you are not expecting to use the remote
for a long period of time, remove the battery to prevent
damage to the remote. Be sure to store the remote away
from excess heat or humidity.
2
N
12V
Q
3. Follow these steps to set the remote (N):
a) Slide the dip switch to “1” inside the battery
compartment and turn the power to the fan OFF.
Turn the power ON. The receiver (M) will make two
musical sounds, indicating that the power supply is
normal.
b) Within 30 seconds, press the “LEARN” key on
the back of the remote (N). Your remote and fan
should be synchronized.
To verify successful synchronization, the ceiling fan light
will blink 3 times and remain ON, and the fan will rotate
on HIGH speed.
3
N
12V
a
b
