12
BLADE INSTALLATION
1. Position the blade (K) over the motor assembly
(A) with threaded posts showing. Make sure
the bottom edge of the blade (K) is fully seated
against the blade holder of motor assembly
(A). Tighten washer-head screws (BB) with
fiber washers (CC) to secure the blade (K) to
the blade holder of motor assembly (A). (Fig.1)
Hardware Used
BB
Washer-Head
Screws
CC
Fiber
Washers
x 9
x 9
WARNING
To avoid possible fire or shock, make
sure that the electrical wires are com-
pletely inside the canopy housing and
not pinched between the housing and
the ceiling.
CANOPY HOUSING INSTALLATION
1. Remove one of the two shoulder screws in the
hanger bracket (B). Loosen the second
shoulder screw without fully removing it.
Assemble ceiling canopy (D) by rotating key
slot over shoulder screw in hanger bracket (B).
Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was
previously removed. (Fig. 1)
2. Securely attach and tighten the canopy
screw cover (E) over the shoulder screws in
the hanger bracket (B), utilizing the keyslot
twistlock feature. (Fig. 2)
1
BB
CC
K
A
1
D
2
E
