ASSEMBLY INSTRUCTIONS
Lowes.com/harborbreeze
14. Measure approximately 6 to 9 in. of lead wire
from the top of the downrod assembly (C),
then cut off the excess. Strip insulation off 1/2
in. from the end of each lead wire.
14
C
13
13. Re-attach the pin previously removed in Step
9, page 8 into the downrod, then align the
hanger ball so the pin is captured in the
groove at the top. Pull the hanger ball tight
against the pin, then tighten the
preassembled set screw in hanger ball.
A loose set screw could result in a wobbly fan.
CAUTION
C
Set screw
10
