11
8
.
Remove and retain the silicone washer (Q), metal
washer (R) and manual nut (S) from the threaded rod
on the light kit (H).
9
.
Lift the glass bowl (I) up to the light kit (H), allowing
the threaded rod to go through the center hole in the
bottom of the glass bowl (I). While holding the glass
bowl (I), guide the pull chains through the appropriate
holes on the bottom of the glass bowl (I). Place the
silicone washer (Q), metal washer (R) and the
manual nut (S) onto the rod and tighten securely.
Guide the pull chains through the appropriate holes
on the finial cap (K). Attach the finial cap (K) to
the glass bowl (I) and tighten them using the
finial (L).
7
.
Install the two bulbs (J) into each socket.
7
FINAL INSTALLATION INSTRUCTIONS
9
8
I
R
Q
S
L
H
K
Q
R
S
J
