10
4. Align the holes between the blade iron (E) and motor.
Install the blade assembly to the motor using motor
screws (CC), and partially tighten. Repeat for the
remaining blade assemblies. Securely tighten all motor
screws (CC).
5. Remove one of the mounting screws (O) preinstalled
on the mounting plate (C) and loosen (do not remove)
the other two. Insert the wires from the motor body (B)
through the center hole in the switch housing (G).
Attach the switch housing (G) to the mounting plate (C)
by placing the keyslot holes from the switch
housing (G) onto the two protruding screw heads on
the mounting plate (C). Twist the switch housing (G)
until the screw heads engage the keyslots. Install
mounting screws (O) into the closed hole in the switch
housing (G). Tighten all mounting screws (O) to
complete attachment of the switch housing (G).
Hardware Used
x 10
CC
Motor Screw
6. Remove the three screws (P) preinstalled on the
switch housing (G). Attach the connector from the
light kit (H) to the connector from the motor body.
Align the three holes between the light kit (H) and
the switch housing (G). Re-install the switch housing
screws (P) to attach the light kit (H) to the switch
housing (G).
4
E
Motor
5
O
G
C
G
B
6
FINAL INSTALLATION INSTRUCTIONS
CC
P
H
