Harbor Breeze HTE22025, Руководство пользователя

Страница: 11 / 20

11
FINAL INSTALLATION INSTRUCTIONS
1. Loosen (but do not remove) the two preassembled
mounting screws (P) on mounting bracket (A) that align
with the slotted holes on canopy (C). Lift canopy (C) up
so slotted holes engage loosened screw heads on
mounting bracket (A), then twist canopy (C) clockwise,
then tighten all screws securely.
2. Raise canopy cover (D) over the mounting screws (P)
visible in canopy (C). Rotate canopy cover (D) clockwise
until it locks into place. You may need to adjust the
mounting screws (P) until the canopy (C) and canopy
cover (D) have a snug fit.
3. Slide blades (F) through slots in the flywheel and attach to
the motor hub using the blade screws (AA). Make sure
the screws securing the blades (F) to the motor hub are
tight and are properly seated.
Noted:
Periodically check blade hardware and resecure
if necessary.
2
Hardware Used
Blade Screw x 9
AA
1
C
D
P
P
A
P
C
3
F
AA