16
FINAL INSTALLATION
10. Feed pull chain coming from the center of the light kit
(K) through the center hole in the glass bowl (P). Lift
the glass bowl (P) and rubber washer (W) over the
threaded rod. Screw the hex nut (V) onto the threaded
rod to secure the glass bowl (P). Feed the pull chains
through the appropriate holes in the finial cap (L). Lift
the finial cap (L) up until it is flush with the glass bowl
(P) and secure with the finial (M).
11. Attach the pull chain extensions (DD) or custom pull
chain extensions (not included) to the fan and light pull
chains.
Proceed to Step 14.
Hardware Used
DD
Pull Chain
Extension
x 2
12.
To install the fan without the light kit (K),
remove the
hex nut and lock washer from the threaded rod on the
inside of the switch housing cap (I). Remove light kit
(K) from the switch housing cap (I), then install the plug
button (EE) into the center hole of the switch housing
cap (I).
Hardware Used
EE
Plug Button
x 1
EE
K
I
DD
12
H
arbor Breez
e
H
arbor Breez
e
11
Light Pull Chain
Fan Pull Chain
Chain
Guide
Hex Nut
Lock Washer
H
arbor Breez
e
H
arbor Breez
e
W
P
K
V
H
L
M
10
