15
FINAL INSTALLATION
Note:
If you wish to install the fan without the light kit (K),
proceed to Step 12.
7.
To install the light kit (K),
remove the preassembled
finial (M), finial cap (L), hex nut (V) and rubber washer
(W) from the light kit (K).
8. Remove the three switch housing screws (Z) from the
switch housing cap (I). Then connect the single-pin
connector from the switch housing (H) to the single-
pin connector from the light kit (K) -- Blue to Blue and
White to White. Then, secure the switch housing cap
(I) with light kit (K) to the switch housing (H) using the
previously removed switch housing screws (Z).
9. Install the bulbs (O) into the sockets on the light kit (K).
IMPORTANT:
Make sure you allow the bulbs (O) and
light kit (K) to cool before you replace the bulbs.
8
H
K
I
Z
9
O
K
Single-pin
Connector
7
K
W
V
L
M
